Product Performance
- Scratch Resistance: That dense porcelain body laughs off scratches from everyday grit, furniture legs, or pet claws. The natural surface hides minor wear beautifully.
- Stain Resistance: Spills? Dirt? Mud? No problem. The ultra-low porosity (<0.5% water absorption) means liquids sit on top, not inside. Wipe it off – no sealing required, ever.
- Slip Resistance: The natural matte finish provides crucial grip, especially when damp. Safer than polished tiles for floors, indoors and out. (Rated R10/R11 range).
- Heat & Fire Resistance: Handles direct sun, radiant heat, and hot climates without warping or damage. Non-combustible (A1 Fire Rating) – a key safety spec.
- Weather Ready: Frost-resistant formulation. It can handle freeze-thaw cycles on covered patios, balconies, or exterior walls without cracking or spalling.
- UV Stable: That light grey color won't fade or yellow, even in sun-drenched rooms or south-facing outdoor areas. Looks new for years.
- Impact Resistant: The 10.5mm thickness isn't just for show. It provides serious structural integrity, resisting chips and cracks better than thinner tiles, especially important for floors.
Key Features
| Size Available | 24x24'', 24''x48'' |
| Color | Light grey |
| Surface | natural |
| Thickness | 10.5mm |
| Face | 24x24''-18 Faces Difference;24''x48''-9 Faces Difference |
| Tile Use | Floor, Wall |
| Indoor/Outdoor | indoor & outdoor |
| Resistance Type | Scratch Resistant, Stain Resistant, Fire Resistant, Slip Resistant, Heat Resistant |
| Samples | Available |
| Storage | Yes |
Important Considerations
- Substrate is King: ESPECIALLY for the 24x48" size and for any floor installation. Floors MUST be perfectly flat, stable, and properly prepared. Use of an uncoupling membrane (like Schluter-DITRA) is highly recommended, particularly over concrete (prevents crack transmission) or wood subfloors (accommodates movement), and is essential for outdoor installations. Walls need sound, appropriate backing.
- Professional Install is Non-Negotiable for 24x48": Handling and setting 24x48" tiles safely and correctly requires experienced installers using:
- Correct Mortar: Premium, non-sag, polymer-modified thin-set mortar specifically rated for large format porcelain. Cheap mortar will fail.
- Proper Technique: 100% back-buttering of each tile is mandatory. Use large-format notched trowels and a leveling clip system.
- Expansion Joints: Critical! Must be installed per industry standards (perimeter, doorways, columns, changes in plane, and every 8-12 ft in each direction) to handle thermal movement. Ignoring this causes tiles to pop or crack.
- Grout Choice Matters: Use only high-quality, flexible, polymer-modified, sanded grout suitable for the joint width (min. 3mm) and the application (interior/exterior). Epoxy grout offers superior stain resistance but is costlier and trickier to install. Ensure joints are completely filled.
- Outdoor Specifics: For patios/balconies, ensure the surface has adequate slope (1/4" per foot min.) for drainage before tiling. Standing water is the enemy. Verify local building codes for slip ratings (R10/R11 generally good for residential covered areas). Full exposure to rain/snow? Not recommended unless specifically tested/rated for full exposure (this is typically for covered outdoor).
- Weight Factor: 10.5mm porcelain is heavy. Confirm the structure (especially balconies or upper floors) can handle the dead load (tile + mortar + grout).
product display
FAQ
Can I use the 24x48" size on walls?
Absolutely. It's rated for walls. Ensure your installer uses the correct adhesive and techniques for large format vertical installations (like mechanical support if needed during setting). It creates a stunning, seamless feature wall.
Why choose 10.5mm over thinner tiles?
The extra thickness (standard is often 8-10mm) provides significantly better strength, impact resistance, and stability, especially important for floors and high-traffic areas. It feels more substantial underfoot and is less prone to cracking.
How do I clean it?
It's incredibly easy. Regular sweeping or vacuuming. For mopping, use warm water and a mild, pH-neutral cleaner. Avoid harsh acids or abrasive pads. The stain resistance means most spills wipe right up.
Hot Tags: tile flooring, China tile flooring suppliers, factory, Outdoor Glazed Glossy Ceramic Subway Wall Tiles, Apricot Grand Soft Polished Porcelain Tile Indoor Outdoor, Ivory White MATTE Lime Stone Effect Polished Porcelain Floor Tile Office Flooring, Classic Creamy White Statuario Porcelain Wall Tile Dinning Room, Vintage Metallic Copper Ceramic Wall Tile, Modern Terracotta Tiles Wall
